Click for Larger View
Standard "SR" roller position shown is standard.
Call us TODAY at 727-835-0674 or
Toll Free at 800-761-4298
Get A Free Quote!
Hannay NSCR700 Spring Rewind Series Live Cable Reel Packages
Live Cable Reel Packages include cable and hose stop installed
• Heavy-duty spring motor.
• Non-sparking ratchet.
• Declutching arbor.
• 3-conductor, 45 amp, 600 volt collector assembly with #8 gauge wiring.
• Double brushes per circuit; brushes are copper graphite with copper alloy rings.
• Additional conductors or higher amperage (up to 300 amps) available; consult mdi.
Note: *Must specify roller position SR, VR, TR. See below for roller position information.
Click Here for NSCR700 Complete Specs
NSCR Series Live Cable Reel Packages
BE SURE TO SPECIFY ROLLER POSITION WHEN ORDERING
On standard spring rewind reels, the hose/cable pays out from the bottom of the reel and to the left when reel is viewed from the swivel joint or collector ring side. Hose/cable rollers are supplied with all spring rewind models and you must specify the roller position when you order. (If roller position is not specified, reels will be shipped with rollers in POSITION SR.)
Specify roller position SR when reel will be:
• Installed in the upright position at any point from floor to eye level.
• Installed on a wall with hose/cable to be retracted close to the wall.
• Installed on ceiling, hose/cable will pay out parallel to and close to the ceiling.
Position SR (Standard) Shown:
Swivel Joint Right
• Installed in the upright position at any point from floor to eye level.
• Installed on a wall with hose/cable to be retracted close to the wall.
• Installed on ceiling, hose/cable will pay out parallel to and close to the ceiling.
Position SR (Standard) Shown:
Swivel Joint Right
Specify roller position VR when reel will be:
• Installed in the upright position, hose/cable will be pulled upright from the reel.
• Installed on ceiling to lift hose/cable.
• Installed on a wall with hose/cable to be pulled straight out
Position VR Shown:
Swivel Joint Right
• Installed in the upright position, hose/cable will be pulled upright from the reel.
• Installed on ceiling to lift hose/cable.
• Installed on a wall with hose/cable to be pulled straight out
Position VR Shown:
Swivel Joint Right
Specify roller position TR when reel will be:
• Installed on floor.
• Installed on ceiling with hose/cable to pay out parallel to the ceiling.
• Installed on a wall with hose/cable to be pulled straight down.
Position TR Shown:
Swivel Joint Left
• Installed on floor.
• Installed on ceiling with hose/cable to pay out parallel to the ceiling.
• Installed on a wall with hose/cable to be pulled straight down.
Position TR Shown:
Swivel Joint Left